Cropico - MTS1A Milliohmmeter Test Stand

Milliohmmeter 4 Terminal Test Standards MTS The Milliohmmeter Test Standards are designed for the simple and easy calibration of low resistance ohmmeters and Kelvin / Thomson bridges. The true four terminal resistance values are switch selected and provision is made for + and - full scale values. A four terminal zero value may also be selected, thus making zero and full scale calibration of instruments simplicity itself. Two models are available, the MTS1A which has 11 values from 1 mohm to 100 Kohm and the MTS2 which has 10 values from 400 micro-ohm to 400 Kohm. Milli-ohmmeter Test Standard 4 Terminal Resistance Switch selected value 10A max. Current Polarity reversal switch 4 terminal zero selection 11 values from 1 mohm to 100 Kohm Durable aluminium case with tilt handle Calibration Certificate included MTS1/A Resistance Value (Ohms ) Uncertainty of adjustment at 20° C Dissipation Max Watts Current Max A Typical Temp. Coeff. 15 to 20°C 100kΩ ± 0.01% 0.1 1 mA <10 ppm 10kΩ ± 0.01% 0.1 3 mA <10 ppm 1kΩ ± 0.01% 0.6 25 mA <10 ppm 100Ω ± 0.01% 0.6 75 mA <10 ppm 19Ω ± 0.01% 0.43 150 mA <10 ppm 10Ω ± 0.01% 0.45 212 mA <10 ppm 1.9Ω ± 0.01% 0.475 500 mA <10 ppm 1Ω ± 0.01% 0.56 750 mA <10 ppm 100 mΩ ± 0.01% 0.625 2.5 A <10 ppm 10 mΩ ± 0.05% 0.25 5 A <10 ppm 1 mΩ ± 0.05% 0.1 10 A <10 ppm

Cropico - MTS1A Milliohmmeter Test Stand

Location: 7 Anella Ave 7 Anella Ave, Castle Hill NSW 2154, Australia

N/A

When you call, Don't forget to mention ADSCT whenever you will call to user. Be safe during payment.