ENERDIS - MAP640

Three-phase network analyzer - Voltage and current - Transients 2 MHz - Class A Advantages Complies with the EN 61000-4-30 Class A standard 3 U / 4 I measurement inputs Fast transients (2 MHz) Analysis of the parameters according to EN 50160 Compact and easy to install in a cabinet Description The MAP 640 analyzer measures and records the following parameters of HV / MV / LV electrical networks: RMS voltage Direct, negative-phase-sequence and homopolar voltage Level of unbalance Current Power measurements (P, Q, S /PF, cos phi) Energy measurements (Ea, Er, Es) Frequency THD Harmonics up to the 50th order Interharmonics Lfl, Pst and Plt flicker Main functions: Voltage parameters: Min., Max. and average values Current parameters: Min., Max. and average values Voltage measurements (dips, outages, interruptions and overvoltages) 1/2-1 cycle RMS HF transients (peak detection, waveform recording): 2 MHz Waveform recording: up to 12.8 kHz, configurable Possibility of configurable pre/post-trigge********* gurable analysis templates (other than EN 50160) Clock synchronization: GPS / DCF (via external coupler) Measurement of signalling voltages < 3,000 Hz PQDIF data format: available as an option Memory backup (Flash): 128 MB Internal power reserve: 10 sec. Main specifications: Voltage input: 3 channels: 0-275/400 VRMS (400/690 V available as an option) HF voltage input: 3 channels Current input: 4 channels, 0-6 A RMS Analogue inputs: 4 (0-20 mA) Voltage accuracy: < 0.1 % Power supply: 85-264 Vac (47-63 Hz) / 110-375 Vdc Communication: RS232 / Current loop / Ethernet port (option) Dimensions (L x H x W) in mm: 160 x 240 x 40

ENERDIS - MAP640

Location: 7 Anella Ave 7 Anella Ave, Castle Hill NSW 2154, Australia

N/A

When you call, Don't forget to mention ADSCT whenever you will call to user. Be safe during payment.