SKF Bearing Heater 729659 C

Electric Hot Plate The SKF Electric Hot Plate 729659 C is designed to heat bea********* ore installation. The thermostati********* ed to a maximum temperature of 200°C and is suitable for bearings with a bore up to 100 mm (4 in) diameter. To retain heat and prevent dirt from contaminating a bearing, the SKF Electric Hot Plate also incorporates a removable lid. Features and Benefits • Adjustable temperature range of 50°C to 200°C (120°F to 390°F) • Protective cover to avoid contamination during heating Note The SKF Electric Hot Plate is supplied with a fitted Schuko (CEE 7/4) two-pin plug. If a UK BS 1363 electrical plug - or other mains electrical plug is required to be fitted, the Schuko plug fitted to the Hot Plate must be removed and the alternative plug fitted by a suitably-qualified person prior to use, such as: (UK) BS1363 rubber plug 488-387 ; (FR) rubber plug 700-1094 ; (DE) Schuko rubber plug 705-0822 ; or (US and JP) nylon plug 316-0133 SKF Electric Induction Heaters and Hot Plates enable bearings and other machinery components to be heated prior to installation. The induction heaters and hot plates are suitable for use with a variety of component sizes (actual sizes accepted depend on which induction heater or hot plate is used) and individual components may be heated to 200/250°C. SKF induction heaters and hot plates are thermostatically-controlled, and for safety reasons, overheat protection is also incorporated into the units to ensure that the induction heater or hot plate is switched off in the event of thermostat failure.

SKF Bearing Heater 729659 C

Location: Sydney 25 Pavesi Street Smithfield NSW 2164

N/A

When you call, Don't forget to mention ADSCT whenever you will call to user. Be safe during payment.